How Much Does a Concrete Driveway Cost in Nelson?
As a general guide, our pricing for a standard concrete driveway starts from around $125–$130 per square metre in Canterbury, and an exposed aggregate driveway from around $145–$150 or more. In Nelson and Tasman the same factors apply, plus travel and programme, so we quote every site individually and for free.1,4
Typical Concrete Driveway Prices
These figures come from our
Christchurch driveway cost guide. They're indicative only, and they assume full excavation, base preparation and a new concrete pour.
1What Affects the Price in Nelson and Tasman
Distance and programme. We work from our Kaiapoi base, so travel and scheduling are part of a Nelson quote.4
What's already there. Removing gravel or soil is straightforward, but demolishing old asphalt or concrete adds labour, machinery, transport and disposal.1
Ground and slope. Sections in Nelson and Tasman range from flat sites to hillside properties, and sloping or soft ground needs more preparation before concrete goes in.
Access. If machinery can't reach the site easily, more labour is needed.1
Finish. Plain concrete is the most economical option, while coloured and exposed aggregate finishes involve extra processes and materials.1
The vehicle crossing. Work in the road reserve follows council rules, which can affect the design and the cost.
Council Rules for Your Driveway Crossing
The part of a driveway that crosses the footpath and road edge is a vehicle crossing, and it has to meet the council's standards. Nelson City Council's
vehicle crossing guidance sets a dropped kerb width of 3.5 m to 6.0 m in residential areas, at least 7.5 m between crossings, and one crossing per property.
2 In Tasman, driveway and crossing work follows the Tasman Resource Management Plan and the Nelson Tasman Land Development Manual, and where kerb and channel exists it's reconstructed to the manual's requirements (see the council's
accessway policy).
3 Check with your council before you finalise a design.
Is Exposed Aggregate Worth It?
For many homeowners, yes. Exposed aggregate gives strong street appeal, a wide choice of stone finishes, a less reflective surface than plain concrete and a finish that disguises everyday wear. We recommend sealing it after installation and resealing roughly every two to three years, depending on traffic and exposure.
1 Our guide to
choosing the right finish for your concrete driveway covers the options in more detail.
Getting an Accurate Nelson Quote
Send us your address, rough measurements and a few photos of the site.
We arrange a site inspection, because every driveway needs one for an accurate price.1
We talk through removal, base preparation, finish, drainage and the crossing.
You get a clear, free quote.
We lay concrete in Nelson, Richmond, Stoke, Motueka and across Tasman. We prepare the site, form it up, and lay and finish the concrete, but we don't supply ready-mix.
4 See our
Nelson page for more.
Frequently Asked Questions
How much does a concrete driveway cost in Nelson?
As a guide, a standard concrete driveway starts from around $125–$130 per square metre in Canterbury, and exposed aggregate from around $145–$150. Nelson prices depend on access, ground, slope and travel, so we quote each site individually and for free.1,4
How much does an exposed aggregate driveway cost?
Exposed aggregate typically starts from around $145–$150 or more per square metre. It costs more than plain concrete because it needs extra washing, acid cleaning and sealing, and premium stones can add to material costs.1
What is the cheapest type of concrete driveway?
Plain concrete is usually the most economical finish. Coloured and exposed aggregate driveways cost more because they involve extra processes and materials, but they can add street appeal and hide everyday wear.1
Do I need council approval for a driveway crossing in Nelson?
A vehicle crossing must meet council standards. In Nelson's residential areas, that means a dropped kerb width of 3.5 m to 6.0 m and one crossing per property. Check the requirements with Nelson City Council or Tasman District Council before you start.2,3
How often should an exposed aggregate driveway be sealed?
We recommend sealing exposed aggregate after installation and resealing about every two to three years, depending on traffic and exposure. Regular sealing helps protect the surface and keep it looking its best.1
Does Letton work in Richmond, Stoke and Motueka?
Yes. We cover Nelson, Richmond, Stoke, Motueka and the wider Tasman region. If your site is further out, call 03 344 1597 and we'll tell you whether we can help.4
Sources
2. Vehicle Crossing Standards — Nelson City Council. Residential dropped kerb width of 3.5 m to 6.0 m, at least 7.5 m between crossings and one crossing per property (references Nelson Tasman Land Development Manual SD407).
4. Concrete Contractors in Nelson & Tasman — Letton Kerb & Channel. Areas covered, the Kaiapoi base, the free quote, and that Letton prepares, forms and places concrete but doesn't supply ready-mix.